Environmental ImpactBecause Balance Is Everything
It makes no sense to trade one management or environmental problem for another. Energy-from-waste through the Klean's PGL (pyrolysis, gasification & liquefaction) systems use little or no water, they help manage waste problems and produces much better emissions profiles than any combustion generating systems.
Because the feedstock for each system can be different depending on the specific project and configuration, the air emissions may vary. However what we can tell you is based on our years of experience gained from operational projects and tests we've completed over years, "typical" emissions from any Klean system will be considered a "minor source" with a favorable profile compared to any combustion generating system. With regard to greenhouse gas emissions, there is no doubt that the Klean systems and technologies have a proven working profile, in multiple locations that outperform other vendors -- this is fact and we welcome you to any of our facilities to see them in operation.
- Oil and energy from waste produce considerably less emission than producing them from fossil fuels
- Electric power from waste can be entitled to REC credits and will displace power otherwise generated from fossil fuels
- On-site conversion of waste at manufacturing facilities of recycling centers will eliminate GHG emissions from the transportation of waste
- On-site systems can also be used to capture heat that can be used elsewhere for additional applications
Depending on the feedstock the end-product of the process is either residual inert ash and/or carbon and both products are suitable for a variety of uses. The end use of the residual depends on the feedstock composition. The ash product from gasification of feedstock is generally used as a filler product in cement, asphalt, and road aggregate applications.
The carbon products from either carbonization or pyrolysis have a multitude of uses and are predominately used in the production of activated carbon for water & air emissions treatment, as high grade rubber filler applications and as an alternative to virgin based carbon black for reinforcement or tinting in rubber and plastic. Klean CBk carbon products can be used by both manufacturers and compounders of reinforced rubber and tinted plastics.
- Custom mixers & rubber compounders
- Molders of rubber boots & mounts
- Extruders of rubber hoses, gaskets, and belts
- Rubber roofing material manufacturers
- Plastic black-film extruders
- Producers of black-rubber sheeting
- Makers of rubber belts & hoses
- Black-rubber tank liner manufacturers
The typical facility recycles its own water with in a specialized water cooling and storage system. This system allows for the rapid cool down of finished end product and can be used to assist in rapid shut cool of reactor units if need be. The systems do not produce waste water nor do they consume large amounts of water. However certain processing applications may require water, in most cases using a closed loop system, whereby the water is recirculated in and out of its own containment vessel for recycling and cooling. Most systems have an onsite water storage system capable of housing 10,000 litres. If an open loop system is required for a certain applications most facilities will only use 180 gallons of water per day.